Roll forming machine
- Roof Panel Roll Forming Machine(1)
- Wall Panel Roll Forming Machine(2)
- Double Deck Roll Forming Machine(3)
- Glazed Tile Roll Forming Machine(4)
- C,Z Purlin Roll Forming Machine(5)
- Floor Deck Roll Forming Machine(6)
- Ridge Tile Roll Forming Machine(7)
- Bending Machine, Shearing Machine, Slitting Machine(8)
- Container Board Machine,Car Panel Machine(9)
- Sandwich panel roll forming machine(10)
- Downspout forming machine(11)
- Dust Shield Roll Forming Machine(12)
- Uncoiling,Leveling,Shearing(13)
- Other Machine(14)
Contacts
TEL:0086-317-8185399
FAX:0086-317-8193636
Mobile:0086-18713641935
Mail: jcxsale@gmail.com
New Forming Machine
- double wall corrugated sheet machine
- double wall and roof panel forming machine
- Roll Forming Machines for Steel Structure Floor
- corrugated roofing sheet making machine
- roof metal panel forming machine
- cold roll forming machine for aluminium
- highway guardrail automatic roll forming machine
- glazed roof tile machine
Cable tray forming machine
Cable tray forming machine
Cable tray forming machine
上一篇：没有了
- Auto cutting, forming and punching by control panel
- Auto setup distance punching by control panel
- NAMVIET - CTM- 2010
| Input Details | CABLE TRAY FORMING MACHINE |
| Raw material | GI & PPGI semi hard - YS 280 to 550mpa |
| Thickness | 1.2 to 2.5mm |
| Strip/Coil Width | 220 - 840mm |
| Coil weight | 5000 Kg |
| Coil inside diameter | 508m |
| Coil outside diemeter | 1200mm |
| Output Details | |
| Number of sizes/Profiles | One |
| Width Range | 100X50 to 600X100mm |
| Length Range | Any length |
| Length tolerance | ± 2.0 mm |
| Dimensional tolerance | ±0.2 mm |
| Technical Details | |
| Line speed | 3-5m/min [1] |
| Power consumption | 13 Kw |
| Floor area required | 18m x 2 m x 1.5m (Including stacker) |
| Approx. weight (Total weight) | 8 tons |
| Line flow direction | Left to right |
| Color | FD Gloss Black BS 00 E 53 & |
| Forming section | |
| Profiles | As per drawing attach files |
| Feeding roll | One set, hard chrome plated. |
| No. of stages | 20 stages. On each layer |
| Roll material | S45C heat treated. |
| Roll surface | 40 micron hard chrome plated |
| Roll hardness | 50 to 55 HRC |
| Rolls up & down | Screw with wheel handle. |
| Roll change | change |
| Shaft diameter | 70mm |
| Shaft material | S45C heat treated. |
| Shaft hardness | 40 HRC |
| Bearing type | Roller bearing |
| Bearing make | NTN Japan |
| Main drive | Hydraulic turbine. |
| Drive to rolls | Chain and sprocket |
| Turbine Make | Yuken Japan |
| Main body | Platform made of steel and welded. |
| Hydraulic system | |
| Pump output pressure | 120Kg/cm2 |
| Pump output volume | 360 lpm |
| Pump make | Yuken Japan |
| Valves Make | Yuken Japan |
| Seals Make | Yuken Japan |
| Motor Make | Siemens Germany. |
| Motor Power | 7.5 Kw |
| Cylinder Make | Components from Yuken Japan. Self assembled. |
| Tank Make | Self |
| Tank Capacity | 300 Litre |
| Electrical Equipments | |
| Control System (PLC) model | S7-200 CPU 224 |
| PLC Make | Siemens Germany. |
| Encoder model | 1000PPR |
| Encoder make | KUBLER |
| Electric components | TELEMECHANIQUE, IDEC, OMRON, |
| HMI Model | OP77A |
| HMI make | Siemens Germany. |
Product Tag :Roll forming machine,Roll former
HeBei Golden Integrity Roll Forming Machineryco.,ltd
Contact Person: Ms.Tracy.yuan
E-mail: 
jcxsale@gmail.com
- Forming machine
- The production line of color steel sandwich panel
- Special Model Of Forming Machine
- 4-6m Bending machines
- steel tile forming machine JCX31-144-1008
- Roof tile forming machine 31-144-1008
- Arc glazed tile forming machine
- Roll forming machine
- Roof Tile Cold Roll Forming Machine
- Water Gutter Forming Machine
- 840 Glazed Tile Roll Forming Machine
- panel roll formers
- roll former machine
- U Beam Roll Forming Machine